Motion Control Systems
MCS 3268G024BX4 RS
V3.0, vierkwadrants-PWM met RS232-poort
Belangrijkste eigenschappen
| Nominale spanning: | UN | 24 V |
|---|---|---|
| Nominaal koppel tot: | MN | 96 mNm |
| Beschermingsklasse: | Class | IP54 |
| Toerental bij nullast tot: | n0 | 4700 min⁻¹ |
| Breedte: | W | 42 mm |
| Hoogte: | H | 50 mm |
| Lengte: | L | 101 mm |
Voordelen
- Maximaal koppel in compacte inbouwruimte
- Interfaces RS232, CANopen, EtherCAT, configuratie via USB
- Optioneel verkrijgbaar met beschermingsklasse IP 54
- Eenvoudig en comfortabel programmeren met behulp van de Motion Manager en de programmeeradapter
- Gestandaardiseerd stekker- en aansluitkabelconcept
- Universeel inzetbaar in slave of stand-alone bedrijf
- Uitgebreide beschermings- en diagnosefuncties, lokale status-LED's
| Elektronische voedingsspanning: | UP | 12 ... 50 V DC |
|---|---|---|
| Koppelconstante: | kM | 43.5 mNm/A |
| Toerentalbereik: | 1 ... 6000 min⁻¹ | |
| Bedrijfstemperatuurbereik: | -40 ... 100 °C | |
| Behuizingsmateriaal: | ||
| Massa: | 378 g |
Operating Area
The display shows the range of possible operation points of the drives at a given ambient temperature of 22°C.
The diagram indicates the recommended speed in relation to the available torque at the output shaft.
It includes the assembly on a plastic- as well as on a metal flange (assembly method: IM B 5).
The nominal voltage linear slope describes the maximal achievable operating points at nominal voltage. Any points of operation above this linear slope will require a supply voltage Umot > UN.
Characteristic curves
Download
3D-CAD Files
Accessories Manual
Accessory Combination
Communications Manual CANopen CiA
Communications Manual RS232
Datasheet
Drive functions
Programming Manual
Technical Information
Technical Manual
Software
FAULHABER Motion Manager Bedienings- en configuratieprogramma's
Application note
AN 149 - Beckhoff TwinCAT 3 and FAULHABER MC V2.5/V3.0 CANopen
AN 150 - Getting started with FAULHABER EtherCAT
AN 151 - Feedback Control Tuning with Motion Manager 6.3 or higher
AN 154 - Updating FAULHABER EtherCAT controller
AN 155 - Support of Third Party BLDC motors
AN 158 - Support of Absolute Encoders with SSI / BiSS-C interface
AN 159 - Position encoder on the load-side of a gearbox
AN 161 - Omron PLC and FAULHABER V3.0 EtherCAT
AN 162 - Analog Hall Sensors
AN 164 - Codesys and FAULHABER V3.0 EtherCAT
AN 165 - Using BASIC Scripts of a FAULHABER Motion Controller V3.0
AN 169 - TwinCAT 3 NC Axes and FAULHABER MC V3.0 EtherCAT
AN 171 - Kendrion and FAULHABER MC V3.0 EtherCAT
AN 174 - Setup and configuration of a CANopen sub-system
AN 176 - Tutorial on the MomanLib
AN 178 - Reduction of PWM motor power losses using additional inductances
AN 182 - Using a separately activatable motor supply
AN 183 - Equivalent DC-current in FAULHABER SC and MC
AN 184 - Adapter settings for Motion Control Systems
AN 186 - Operating a FAULHABER CO driver out of a CODESYS environment
AN 187 - Grounding, shielding and filtering - Installation of the drive system in the machine
AN 188 - Settings for a RS232 network of Motion Controllers
AN 189 - Designing a motherboard for a MC3001 Motion Controller
AN 191 - Control MC V3.0 MotionController via RS232 an Arduino Library
AN 193 - SIEMENS S7-1500 PN/CAN Link and FAULHABER CANopen Motion Controller
AN 195 - Change from Motion Controllers V2.5 to V3.0 - CANopen interface
AN 196 - Change from Motion Controllers V2.5 to V3.0 - Control via RS232 interface
AN 197 - Best practice RS232 communication
AN 205 - Condition Monitoring using the IoT ready functionality
Declarations of Conformity
EG-00026-001 - MCS 32xx RS/CO, MCS 32xx ET
Declarations of Incorporation
EG-00027-001 - MCS 32xx RS/CO, MCS 32xx ET